Super-hard processing of professional, special, non-standard, special shaped and new products with any kind, any shape and tolerance. If you have any similar inquiry, please fax us your address or call us to get samples in the photos and related catalogue for your reference (only a small amount is allowed).
We keep around RMB 20～30 Million turnover stock articles such as raw material, semi-products, finished products in an ordinary year, we are capable to produce according to drawing or sample provided by the customer, so as to present you a favourable cost-performance ratio…Welcome to visit our factory.
Products Description: LZQ is an OEM factory for all kinds of Zirconia mills, such as CVD diamond coating tooth turning the pin, ball-nose milling cutter, Zirconia Burns for Dental CAD/CAM, IMES turning the pin, etc. We can also produce Zirconia mills of any sizes just according to your requirement. We specialize in super-hard machining for special, non-standard new items with different size and tolerance. We can customize tools with different materials and size tolerance according to your demand and
For the mills with common fluent length, the mills usually have the whole flute. However, there will be a thin tube in the middle of the mills if the flute length is very long. For example, for size2.0, the flute length is 5.0 and the length of the thin tube will be 10mm. The production cost will be higher if the flute length is very long.
Packaging & Shipping
Other parts are packed in the wooden case
If any special requirements, we will pack it as requested
Coatings: The right tool coatings can have a great influence on the cutting process by increasing cutting speed and tool life, and improving the surface finish. Polycrystalline diamond (PCD) is an exceptionally hard coating used on cutters which must withstand high abrasive wear. A PCD coated tool may last up to 100 times longer than an uncoated tool. However, the coating cannot be used at temperatures above 600 degrees C, or on ferrous metals. Tools for machining aluminium are sometimes given a coating of TiAlN. Aluminium is a relatively sticky metal and can weld itself to the teeth of tools, causing them to appear blunt. However, it tends not to stick to TiAlN, allowing the tool to be used for much longer in aluminium.