Different functions of different types:
● When applying torque, check that the screw hex is completely installed.
Application of torque with imperfect installation may result in a fracture at the strength under fracture strength.
● Torque should be applied vertically. (Do not tilt the set.)
● If the tip is bent due to the use for a long time or excessive torque, replace it.
The connectors are in two types; ratchet and contra angle.
The tool used when implanting fixture, instead of using fixture mount connected to the fixture. - It can be used as a ratchet by connecting with ratchet connector.
(Super-high anti-rust (AA)& General anti-rust(A)&with super-high precision process)
① Super-high anti-rust high wear resistant stainless steel series
② General anti-rust high wear resistant stainless steel series(A)(HRC45°~64°Section)
③ If necessary, with super-high finish grinding, the driver finish could reach ±0.002mm.
we can customize any shape of Torx driver, the tolerance can be up to±0.002mm（to match the screw samples accordingly)
Regardless of the abutment material or technique, an effect of the abutment is then taken and a crown secured to the abutment with dental cement. Another variation on abutment/crown mannequin is when the crown and abutment are one piece and the lag-screw traverses both to impenetrable the one-piece structure to the inner thread on the implant. There does now not show up to be any benefit, in terms of success, for cement versus screw-retained prosthetics, even though the latter is believed to be simpler to keep (and change when the prosthetic fractures) and the former gives an excessive esthetic performance.